SpeedNetworking

Roundtables vs Speed Networking for a Group of 30

Roundtables go deeper on one topic, while speed networking creates more new connections. Here is how to choose for a group of 30.

Updated: 10.11.2026

For a group of 30, the short answer is this: use roundtables when you want a deeper conversation about one topic, and use speed networking when you want everyone to meet as many new people as possible. If the goal is contacts rather than discussion, speed networking wins. The catch is that running rounds and rotations by hand takes a lot of an organizer's attention. That is why we run it online with SpeedNetworking: 1:1 rounds start and end on their own, and pairs rotate automatically.

Below we compare both formats using a concrete example of 30 attendees, with simple math you can reuse in your own planning.

How the two formats differ

A roundtable is a conversation among several people at one table, usually around a set topic. With 30 people that might be five tables of six. A session runs fifteen minutes or longer, and when time is up some people move to another table.

Speed networking is a series of short one-on-one conversations. Each lasts about 5 to 7 minutes, then pairs change. Nobody is stuck for long with someone they have nothing to say to, and nobody gets talked over by the loudest person at the table.

For the basics of the format, see our guide to speed networking. For a wider menu of variations, read 15 Speed Networking Ideas and Formats That Work.

The math: how many people does each attendee meet?

This is the strongest numeric argument, and it is worth working out before you pick a format.

One-on-one speed networking

With the default setup of 8 rounds at 7 minutes each, you get 56 minutes of conversation. Every attendee talks to 8 different people. Shorten rounds to 5 minutes and you fit more of them in the same window. In a group of 30 there are 29 possible partners, so even 8 rounds covers more than a quarter of the room.

Roundtables

With tables of six, one session introduces you to 5 people. Three 20-minute sessions make an hour and, with well-planned seating, up to 15 people. In practice it is fewer: some table combinations repeat, and three sessions is a ceiling, not a promise. And in a group of six, not everyone gets equal airtime.

The takeaway: roundtables produce fewer but deeper connections, while speed networking produces more first conversations. With 30 people and a goal like "meet new people," the second matters more. To size the number of rounds for your own group, try the rotation calculator.

Side-by-side for a group of 30

CriterionRoundtables1:1 speed networking
People met in about 60 minutesUp to 15 with three sessions8 with 8 rounds of 7 min, more with shorter rounds
Depth of conversationGreater, there is time for the topicLighter, it is a first contact
Equal airtimeDepends on the moderatorBuilt in, both people speak
Moderator needed per tableYes, one per tableNo, one host is enough
Shy attendeesHarder, groups can intimidateEasier, 1:1 has clear boundaries
Topic focusA strength of the formatNeeds conversation starters
LogisticsTables, signs, seat changesA round and rotation plan

One row goes to roundtables: when the group needs to work through a specific topic, such as a shared industry problem, a table conversation is better. If that is your event's purpose, choose tables.

When roundtables are the right call

  • You have one shared topic and want people to swap experience.
  • Attendees already know each other and you want to deepen relationships, not create new ones.
  • You have people available to facilitate every table.
  • The event is a workshop or discussion, not a mixer.

When speed networking is the right call

  • Most attendees are strangers and you want each of them to meet many new people.
  • You have one host, not a team of facilitators.
  • You want to make sure nobody is left standing alone and nobody dominates a conversation.
  • You want a clear list afterward of who wanted to connect with whom.

A hybrid also works: a short speed networking block as a warm-up, then small-group discussion among people who both wanted a longer chat. For the full walkthrough, see How to Run a Speed Networking Event Step by Step.

Setting up roundtables, if you go that way

Tables take more prep than most people expect. Before you commit, check that you can cover the following.

  • A prompt for each table. One sentence an attendee understands without explanation, such as "How did you land your first customers?"
  • A moderator. Someone who makes sure everyone gets a few sentences in and nobody takes over.
  • Seating plans. Decide ahead who sits with whom in each session so combinations do not repeat. With 30 people that is a puzzle you solve by hand.
  • A clear change signal. An announcement and time to move, or every switch eats several minutes.
  • Notes. Decide who captures takeaways from each table and how they reach everyone.

If you do not have a team to staff the tables, the 1:1 version is far simpler for a single organizer.

How to do it with SpeedNetworking

SpeedNetworking is online only: 1:1 video conversations run in the browser, with nothing to install. For a group of 30, setup looks like this:

  1. Create a free account and an event. Set the number of rounds and the round length. The default is 8 rounds of 7 minutes with a 3-minute lobby before the start, and you can change each value.
  2. Share the registration link. Attendees register themselves, so you do not enter anyone manually.
  3. Turn on pre-event swipe (Growth and Business plans). Before the event, attendees browse profiles and mark Like, Maybe, or Pass. Mutual likes are paired first, and a mutual pass is avoided. Choices stay private. Details are in the help article on pre-event swipe.
  4. Keep AI icebreakers on. For each pair, an AI model generates questions based on both people's profiles, so no conversation starts with an awkward silence. You can turn them off. For more ideas, see our list of speed networking questions.
  5. Start the event and watch the live panel. Rounds begin and end on their own, and breaks and pair rotation happen automatically. You can pause, resume, skip, or extend a round when needed.
  6. After the event, attendees see whom they liked and who liked them. Attendees who opted in get an email with their mutual matches, and you can export a CSV.

A walkthrough of the first steps is in the help article your first event.

SpeedNetworking vs. the manual setup

We compare against a category, a video call with breakout rooms plus a spreadsheet and a timer, not against any specific brand.

ElementManual (video call + spreadsheet + timer)SpeedNetworking
Starting and ending roundsBy hand, a timer and announcementsAutomatic, rounds start and end on their own
Pair rotationA spreadsheet plan and manual room assignmentAutomatic, with breaks
Matching peopleRandom or manualPre-event swipe, mutual likes paired first
Conversation startersOne list for everyoneAI questions tailored to each pair
Attendee accessOften an account or install, depending on the toolBrowser-based video, no install
Mutual matches after the eventCollected by handIn the app, by email, and as a CSV export
BrandingDepends on the toolYour own subdomain, logo, and colors
Upfront costTools you already haveA paid plan or a one-time fee

In fairness, the last row favors the manual route. If you are running one small event and already own the tools, you can do it at no extra cost. For recurring events, organizer time usually costs more. Current plans are on the pricing page.

A 30-person run of show: the speed networking version

  1. Lobby, welcome, and ground rules: 3 to 5 minutes.
  2. 8 rounds of 7 minutes, 56 minutes in total, with short breaks while pairs change.
  3. Wrap-up and a pointer on how to check mutual matches: 5 minutes.

The whole thing fits in a little over an hour.

Common mistakes when choosing a format

  • Tables without a topic. A roundtable with no prompt turns into small talk dominated by a few voices.
  • Too few rounds. With 30 people, three rounds is not enough for anyone to feel the value.
  • No plan for after. Without a list of mutual matches, contacts fade. Plan a follow-up within a few days.
  • Rounds that run long. Rounds are typically 5 to 7 minutes; a longer round means fewer conversations in the same time.

Bottom line and next step

Choose roundtables when the goal is discussion of one topic. Choose speed networking when the goal is new contacts and you want each of the 30 attendees to meet as many people as possible. If you lean toward the second, you can test it at no risk: create a free account and run a trial event for up to 10 attendees. You will see the rounds, rotation, and AI questions in action before you invite the whole group.

Frequently asked questions

Roundtables or speed networking for 30 people?+

If the goal is meeting new people, choose speed networking. Roundtables are better when attendees already know each other and you want to discuss one topic.

How many people does each attendee meet at speed networking?+

With 8 rounds of 7 minutes, each attendee talks to 8 different people. Shorter rounds fit more conversations into the same time.

How many people should sit at a roundtable?+

Usually 5 to 6. For 30 attendees that means five tables of six, with a moderator at each.

Does speed networking work with 30 attendees?+

Yes. With 30 people there are 29 possible partners, and 8 rounds lets each person meet more than a quarter of the group.

Can you combine roundtables and speed networking?+

Yes. Start with a short speed networking block, then invite people who wanted a longer conversation to small-group discussions.

How long does speed networking take for 30 people?+

With the default 8 rounds of 7 minutes, conversations take 56 minutes. With a welcome and wrap-up, the event runs a little over an hour.

Run online speed networking without a stopwatch or a spreadsheet

Rounds, pair rotation and conversation starters run on their own. Your first trial event is free.