A speed networking facilitator has one job: keep attendees talking to each other instead of listening to the host. The most reliable way is a facilitator script written down to the minute, plus a tool that watches the clock for you. Below you get a script for an online event, the lines to say out loud, and the mistakes that most often derail a session.
Running an event by hand (a video call, a spreadsheet of pairings and a stopwatch) means you track time, move people and fix problems all at once. SpeedNetworking takes the clock and the rotation off your plate: rounds start and end on their own and pairs change automatically. You facilitate people, not a spreadsheet.
The script assumes the platform defaults: 8 rounds of 7 minutes and a lobby before the start. You can change both the number of rounds and the round length, so treat the minutes as a template to adapt to your group.
Before you start: what a facilitator needs ready
A good run of show starts the day before. Prepare five things:
- The goal in one sentence. For example: "Meet eight people from the industry and pick three to follow up with."
- Three ground rules to repeat at the start: camera on, one-on-one conversation, notes after the round and not during it.
- A tech backup plan: who helps attendees with camera and microphone, and in which channel.
- Your own profile filled in so you are not a blank tile in the lobby.
- The attendee list and any notes on who asked for something specific, such as a particular type of contact.
If this is your first event, skim the first event guide. To check how many rounds fit your time slot, use the rotation calculator.
The run of show, minute by minute
Here is a template for a group where everyone can talk to most other people. The round times are the defaults. Break length between rounds is set by the platform, so do not hard-code it into your own schedule; check it in a rehearsal.
| Time | Stage | What you do |
|---|---|---|
| T-15 min | Setup | Check camera, microphone and connection. Open the organizer panel. |
| T-5 min | Arrivals | Greet people as they enter the lobby. Answer tech questions. |
| Lobby (3 min by default) | Welcome | State the goal, the three rules and how the session flows. |
| Rounds 1-2 (7 min each) | Warm-up | Watch the panel. Stay out of conversations unless someone flags a problem. |
| After round 2 | Quick message | Text chat: remind people to take notes after rounds and to use the icebreaker questions. |
| Rounds 3-6 (7 min each) | Core | Check active pairs and respond to requests. No speeches. |
| Rounds 7-8 (7 min each) | Final stretch | Remind people that the last conversations are a good moment to agree on a next step. |
| After round 8 | Wrap-up | Thank everyone, explain what happens next (the mutual match email), end the event. |
With eight rounds of 7 minutes, the conversations alone take 56 minutes, and with breaks and the lobby the whole event runs a little over an hour. That is a sensible size: people still have energy at the end.
What to say at the start
Do not improvise the opening. Thirty seconds is enough:
Hi everyone, thanks for being here. For the next hour you will meet several people in one-on-one conversations. Each round is seven minutes and ends on its own. Camera on, notes after the round. At the end you will see who matched with whom. See you in your first conversation.
Attendees will use the first round to get used to the format. Judge it by whether everyone has video and sound, not by the quality of the conversations.
How to do it with SpeedNetworking
These steps take you from an empty account to a live event. Everything below relies on actual platform features.
- Create the event and set the rounds. The default is 8 rounds of 7 minutes, but you set the number of rounds and the round length yourself. Set the lobby too (3 minutes by default).
- Share the registration link. Attendees sign up on their own, so you do not enter anyone by hand.
- Turn on pre-event swipe (Growth and Business plans) if you want attendees to browse profiles beforehand and mark Like, Maybe or Pass. Mutual likes are paired first. Choices stay private. Details are in the swipe help page.
- Keep AI icebreakers on, or turn them off if you prefer your own questions. For each pair the system generates questions based on both profiles. When AI is unavailable, it falls back to general business questions.
- On event day, open the live panel. You see the current round, active pairs and time. You can pause, resume, skip or extend a round, and end the event.
- After the event, attendees see their mutual matches, and those who opted in receive them by email. You can export a CSV of attendees and mutual matches.
For the full list of capabilities see features, and for plans see pricing.
The organizer panel: when to step in
Auto-pilot does not mean the facilitator disappears. It means you step in only when needed. Four typical situations:
- Someone has a camera problem. Reply in chat and suggest refreshing the page. Video runs in the browser with no installation, so allowing camera access is usually the fix.
- Conversations run longer than expected. Extend the round from the panel instead of shortening later ones.
- Something disrupted the event. Pause, explain in one sentence and resume.
- Few people are left. Skip a round if the rotation no longer makes sense, or end the event early.
With an odd number of attendees, one person has no partner in a given round. We covered the fixes in Speed Networking With an Odd Number of People.
Manual vs. tool: a comparison
Here are two ways of running the same script: a video call with a spreadsheet and a stopwatch, and SpeedNetworking.
| Element | Manual (video call + spreadsheet + stopwatch) | SpeedNetworking |
|---|---|---|
| Round start and end | Host tracks time and announces it | Rounds start and end on their own |
| Pair rotation | Manual room assignment or a spreadsheet | Automatic rotation and breaks |
| Mutual matches | Collected by hand after the event | Visible after the event, email for those who opted in, CSV export |
| Pre-event swipe | None, you have to build a form | Like / Maybe / Pass (Growth, Business) |
| Conversation prompts | One shared list for everyone | AI questions tailored to each pair |
| Video | Depends on the tool, often an account or an app | In the browser, no installation |
| Subdomain and branding | Usually none | Subdomain, logo, colors (custom domain on Business) |
| Invoices | Depends on the vendor | VAT invoices automatically (Polish and EU reverse charge) |
| Cost to start | Often zero if you already have the tools | Paid plan or one-time fee |
The last row shows honestly where the manual approach wins: for a small group and a one-off event, a spreadsheet and a stopwatch are enough and cost nothing. As events become more frequent, your time becomes the real cost.
How to adapt the script to your group
The eight-round template suits a group that can spare an hour for conversations. If you have less time, cut the number of rounds, not the round length: five minutes is the floor where a conversation still works. If the group is very diverse, turn on swipe and leave more weight on mutual matches. If it is a members-only meeting of people who already know each other, shorten the welcome and stress that the goal is meeting new people, not repeating old chats. More on such meetings is in the page for chambers and business clubs.
Common facilitator mistakes
Talking too much
Attendees came for conversations. Every minute of your monologue is a minute taken from them. Keep the opening to thirty seconds and between-round messages to one sentence.
An unrehearsed start
Most problems appear in the first five minutes: camera, microphone, an unfamiliar format. Log in to the platform early and run a test with a colleague.
Changing the plan mid-event
If you planned eight rounds, do not add a ninth because it feels like a shame to stop. Attendees have their own calendars. The exception is extending a single round, which you decide based on the panel.
No next step
An event without follow-up leaves people with a pleasant chat and nothing more. In the wrap-up, tell them they will receive their mutual matches and encourage a first message the same day. For prompts to use in the conversations, see our speed networking questions guide.
Facilitator checklist
- Event configured: number of rounds, round length, lobby.
- Registration link sent out well in advance.
- Swipe on, if your plan includes it.
- Tech check done 15 minutes before the start.
- Opening lines rehearsed out loud.
- Organizer panel open in a separate window.
- Mutual match email announced in the wrap-up.
Your next step
The script is simple: a short start, rounds without your interference, and a wrap-up that announces the follow-up. The best way to test it is with a small group. Create a free account and run a trial event for up to 10 attendees, then decide whether a plan fits your events.